Steel plants are the hardest thing we model. Not because the equipment is complex, but because the plant is a vertical stack of processes that most people have never seen from the inside.
A visitor looking at a blast furnace model does not know what the top platform does. They know the plant makes steel, and that is all. A good model has to teach the rest without a lecture.
The Problem with Steel Plants as Models
Every other plant we build is horizontal: tanks, buildings, roads, all laid out on a plane. A steel plant goes up. Blast furnace, hot stoves, gas cleaning, skip bridge, and then the melt shop beside it. If you model it flat, you lose the height relationship that explains the process.
So we build tall and keep the vertical rhythm. The furnace stands at true relative height, the stoves sit beside it, and the bridge connects them at the angle the real plant uses. Height is the story.
Blast Furnace, Coking and Rolling Lines
Blast furnace and hot stoves
At 1:100, a 40 m furnace stands about 400 mm tall. We model the shell, the tuyere band, the cast house and the four stoves with their chimneys. The skip bridge is built as a thin truss, because at this scale a solid beam looks like a wall.
Coke oven battery
The battery is a long repeating block, and repetition is where models get boring. We break it with the quench tower, the pusher side and the coke wharf, so the eye has three anchors along a 900 mm run.
Continuous casting and rolling
The caster is short and dense; the rolling mill is long and thin. We usually place them at different scales, caster at 1:100 and mill at 1:200, with a clearly marked transition. It is honest, and it keeps the mill readable in a room.
Scale Choices for Hot and Heavy Equipment
- 1:100 — furnace and cast house detail, 400–600 mm tall.
- 1:200 — full melt shop and mill, 2000–3000 mm long.
- 1:500 — entire works with raw material yard and rail.
We never model the interior of a furnace at 1:200. A cutaway at that scale becomes a dark box. If the client wants to show the process inside, we build one section at 1:50 as a separate cutaway piece and place it beside the main model.
Delivery, Crating and Installation
- Drawings in. General arrangement, furnace elevation and a plant layout. Photos of the existing plant help with colour and weathering.
- Quote in one working day. Scale options, height, footprint and delivery date.
- 3D review. Height relationships and colour coding are confirmed before cutting.
- Build and crate. 25–35 days typical. Tall sections are crated upright with a braced frame, and the furnace is always a separate crate.
Our coal industry equipment models follow the same approach for heavy process plant, and the 1:50 production line case shows how we handle dense machinery.
Questions from Steel Engineers
Can you show the gas and water circuits?
Yes. Gas cleaning, dust removal and the water treatment loop are shown as colour-coded pipe routes, usually at a simplified level. We keep the main flow visible and drop the small branches, which is what engineers ask for once they see a fully piped model.
How do you handle the dust and heat look?
We do not paint dirt onto a clean model. Instead we use a two-tone finish: darker base tones on structures, lighter highlights on hot surfaces. Weathering is applied by hand only on the areas the client points out, and always before a matte clear coat.
Is a tall model stable in transit?
Yes, with a braced crate. The furnace and stoves travel upright, bolted to a plywood frame, and the base plate is shipped separately. We have moved models over 700 mm tall by air freight without damage, provided the crate is not repacked at the airport.
Send your plant layout to the contact page and we will reply with a scale recommendation and a fixed price in one working day.